Motion Sensor / Detector Switches & Motion Sensor Circuits

Both a touch and a contact switch are built on one PC board so that the builder can see how each works. A battery can power the contact switch but you'll need an AC power supply for the touch switch to work well. The circuit switches a relay with a 3 Amp

This super sensor detector sounds an alarm if someone approaches the unit. Adds safety to your home or office. Learn the basics of motion detector technology. Uses pyroelectric infrared sensor.

Three relay-based electronic switching circuits that switch according to light levels.

This super cool circuit behaves as a clapper-switch. You clap and the circuit turns on. Clap and it turns off. Great as a light clap switch.

The most popular use for this kit is to make you own night-light. It can also be used to switch just about any appliance on or off in light or darkness. Light sensitivity is adjustable over quite a range. The relay can handle up to 10 Amps at 110VAC. Oper

Power on/off almost anything with this infrared controlled electronic switch. Some spell it Infared!

The circuit uses a matched pair of 40 Khz transducer elements to detect movement up to 22 feet away. You may add a relay (not included) to switch higher voltage loads. The unit switches a LED for movement indication. Sensitivity is setable via control. Cr

A bit different from other kits. We supply the three basic components for you to make your own movement detector. Included is a PCB mounted fresnel lens, a PIR movement sensor and the latest movement IC just released. Eight pages of application notes show

This is an excellent security device, sees infra red heat of intruder in field of view. This is a recent design for a PIR detector; should not be underestimated. Rather than the usual opamps-amps and amplifiers, this kit uses a movement IC. Has PC board m

Adjust the sensitivity of this circuit to control a Relay that can turn on whatever is connected to the contacts of the relay. Very practical circuit for a variety of projects. Turn on a light when your dog barks, or set of a siren when an intruder makes

This circuit is an alarm for the home, car and a lot more. It employs a magnet and reed switch to trigger the circuit. An intergral piezo sounder produces the alarm sound (100dB). There is also a relay capable fo handling up to 10 amps that will switch wh

Timer kits are an ever popular item with the hobbyist. This uses a 555 timer IC and goes from 8 seconds to 8192 seconds.

Timer circuits are handy for many experimenters projects, not to mention the photo lab. This kit has three separate circuits that can be used individually or together. Each circuit has a separate 5 Amp relay. Circuits operate on 9 Volt DC.

A stronger, Mecha-Medusa is a walking robot that operates with the aid of a sound sensor. Clap hands or snap fingers to command this robot to start walking on four legs. Stops automatically after a preset time. Ideal for the hobbyist or budding scientist.

This mini-VOX - voice operated relay - is based on a circuit published in Silicon Chip, 9/1994, p31.

This kit uses an infrared beam to monitor door & passage-ways or any other area.

Weasell is a tenacious little robot warrior that embodies two sensors that allow it to 'see' a line or 'feel' its way along walls and around corners.

Use an old PC as a "dedicated controller" to turn on or off devices lab or radio shack. The circuit includes eight relays controlled with (included) software for either DOS or Windows 3.1. The kit is a boon to the Science Fair project, laborator