Hi: Power Am Transmitters

Circuit diagram for an AM radio antenna preamplifier that amplifiers the signal before it get to the AM receiver, thus making the AM radio signals stronger for better reception.

Compact positive (K124) and negative (K125) adjustable power supply +/-

This is a practical battery eliminator for your projects. This is a basic power supply using two 7805 regulators; input up to 20 VAC from a transformer. There are two outputs; one regulated at 5 VDC, and the other one is variable. Includes plastic case. T

AM Transmitter circuit diagram, designed for transmission of AM (Amplitude Modulation) DSB (Double Side Band) radio signals. Ideal for HAM's

Build this educational Deluxe Bench DC Power Supply Kit

Build this educational Deluxe Bench DC Power Supply Kit

Compact negative adjustable power supply

A handy portable power supply with a variable output voltage of 15VDC. Mounted in a rugged bakelite case.

Training course of 56 pages is divided into 9 lessons; Audio Amplifier, AM Detector, AM IF, AM Amplifier, Amplifier, AM Mixer & Oscillator, FM Detector, 1st FM IF, 2nd FM IF, FM RF Stages. Superheterodyne receiver of standard AM (amplitude modulated) and

This is a practical power supply for all your projects. It provides 6 different outputs between 6 and 20VDC @ 500mA.

A low power consumption circuit that uses few components in order to power a 6 inch fluorescent tube (AC) from 12 Volts DC.

A very basic power supply that can be adjusted over a range of about 1.5 to 35 volts DC. If you add a heat sink (included), you can run it as hot as 2 Amps output; otherwise about 60 mA @ 12 volts. This is a text book circuit using an LM317, which is a 3

A very basic power supply that can be adjusted over a range of about 1.5 to 35 volts DC. If you add a heat sink (included), you can run it as hot as 2 Amps output; otherwise about 60 mA @ 12 volts. This is a text book circuit using an LM317, which is a 3

An extremely simple and cheap DC power supply with variable voltage (1.2-25 Volts) control. The circuit uses an LM317 integrated voltage regulator Ic.

The TX150 from Broadcast Warehouse is an extremely high quality stereo FM transmitter that complies with FCC Standards, meaning that it can be used for commerical broadcasting. Output power is 150 Watts.

The TX300 from Broadcast Warehouse is an extremely high quality stereo FM transmitter that complies with FCC Standards, meaning that it can be used for commerical broadcasting. Output power is 300 Watts.

The TX50 from Broadcast Warehouse is an extremely high quality stereo FM transmitter that complies with FCC Standards, meaning that it can be used for commerical broadcasting. Output power is 50 Watts.

The TX25 from Broadcast Warehouse is an extremely high quality stereo FM transmitter that complies with FCC Standards, meaning that it can be used for commerical broadcasting. Output power is 25 Watts.

The Veronica 1 Watt PLL FM Transmitter is a pretty decent broadcast PLL exciter or transmitter that can be used alone or with an RF power amplifier for high power radio broadcast.

A very simple variable power supply with a DC output voltage adjustable from 1-3- Volts, with a maximum DC current of 5 Amps. Uses LM338 DC voltage regulator IC.

Variable-voltage DC power supply circuit. The output DC voltage is adjustable from 0.7-24V, with current limiting range from 50mA up to 2 Amps. Main transistor is the 2N3055.