Dc: Power Supply 150 Amp

A very simple variable power supply with a DC output voltage adjustable from 1-3- Volts, with a maximum DC current of 5 Amps. Uses LM338 DC voltage regulator IC.

An extremely simple and cheap DC power supply with variable voltage (1.2-25 Volts) control. The circuit uses an LM317 integrated voltage regulator Ic.

Variable-voltage DC power supply circuit. The output DC voltage is adjustable from 0.7-24V, with current limiting range from 50mA up to 2 Amps. Main transistor is the 2N3055.

Build this educational Deluxe Bench DC Power Supply Kit

A very basic power supply that can be adjusted over a range of about 1.5 to 35 volts DC. If you add a heat sink (included), you can run it as hot as 2 Amps output; otherwise about 60 mA @ 12 volts. This is a text book circuit using an LM317, which is a 3

A very basic power supply that can be adjusted over a range of about 1.5 to 35 volts DC. If you add a heat sink (included), you can run it as hot as 2 Amps output; otherwise about 60 mA @ 12 volts. This is a text book circuit using an LM317, which is a 3

Compact positive (K124) and negative (K125) adjustable power supply +/-

Build this educational Deluxe Bench DC Power Supply Kit

Provides 3 amps current at 3-30 Volts DC. Reduces ripple voltage to almost non-existant.

This is a practical battery eliminator for your projects. This is a basic power supply using two 7805 regulators; input up to 20 VAC from a transformer. There are two outputs; one regulated at 5 VDC, and the other one is variable. Includes plastic case. T

A handy portable power supply with a variable output voltage of 15VDC. Mounted in a rugged bakelite case.

This is a practical power supply for all your projects. It provides 6 different outputs between 6 and 20VDC @ 500mA.

Compact negative adjustable power supply

The TX150 from Broadcast Warehouse is an extremely high quality stereo FM transmitter that complies with FCC Standards, meaning that it can be used for commerical broadcasting. Output power is 150 Watts.

A low power consumption circuit that uses few components in order to power a 6 inch fluorescent tube (AC) from 12 Volts DC.

Using a PIC 16C71, a crystal, 8 resistors & 4 capacitors this kit will independently control up to 4 servo motors. We do not supply the potentiometers or servo motors. (We used a Futaba FP-S148 for out tests.) 5V DC power supply required. Full instruction

This 150 Watt FM RF Amplifier will increase the output of your FM transmitter from about 1 Watt to 150 Watts.

Circuit diagram for an ultra low-noise driver/supply circuit for white LEDs, using the IC LTC3201. Ensures a stable brightness in white LED driven items.

The Veronica 1 Watt PLL FM Transmitter is a pretty decent broadcast PLL exciter or transmitter that can be used alone or with an RF power amplifier for high power radio broadcast.

The TX300 from Broadcast Warehouse is an extremely high quality stereo FM transmitter that complies with FCC Standards, meaning that it can be used for commerical broadcasting. Output power is 300 Watts.

The TX50 from Broadcast Warehouse is an extremely high quality stereo FM transmitter that complies with FCC Standards, meaning that it can be used for commerical broadcasting. Output power is 50 Watts.