Computer: Mother Board

You can program this stand alone controller via PC Serial Port. Simply connect a serial cable from your computer to the connector on relay board.

You can program this stand alone controller via PC Serial Port. Simply connect a serial cable from your computer to the connector on relay board.

This LCD expansion board upgrades your exisiting BW PLL exciter / transmitter so that it has an LCD readout and easier frequency adjustment.

An excellent Stereo FM Transmitter which operates through the USB port of essentially any computer. FCC Compliant!

Allows for connection to Personal Computers USB (Universal Serial Bus)

Low cost 12 channel Infrared Remote Control with relay board

The company HiTechnic has recently released a new NXT Prototyping Board

Both a touch and a contact switch are built on one PC board so that the builder can see how each works. A battery can power the contact switch but you'll need an AC power supply for the touch switch to work well. The circuit switches a relay with a 3 Amp

The circuit flashes five LED's in sequence repeatedly until you turn it off. Flash rate is user adjustable. The circuit uses an IC chip on Board which you will then mount on the included mother board; battery holder is included. Powered by a 3 volt supply

This is the Brodcast Warehouse All-in-One PCB 1 Watt FM Transmitter. This item has a built in limiter / compressor & stereo encoder!

Use an old PC as a "dedicated controller" to turn on or off devices lab or radio shack. The circuit includes eight relays controlled with (included) software for either DOS or Windows 3.1. The kit is a boon to the Science Fair project, laborator

Use an old PC as a dedicated controller to turn on or off devices lab or radio shack. The circuit includes eight relays controlled with (included) software for either DOS or Windows 3.1. The kit is a boon to the Science Fair project, laboratory experiment