Battery: Powered Light
2 Comments - in Telephone
A very clever portable cell phone battery charger that uses 8x1.5 AA cells (batteries) to charge cell-phone / mobile phone batteries while mobile. No more need for a mains outlet!
The Traffic Lights circuit performs actions just like those of a real traffic light system, switching between red, amber & green.
The most popular use for this kit is to make you own night-light. It can also be used to switch just about any appliance on or off in light or darkness. Light sensitivity is adjustable over quite a range. The relay can handle up to 10 Amps at 110VAC. Oper
Teaches the fundamentals of a basic robotic sensing and locomotion principles while testing motor skills. Includes 5 switch wires controller to grab, release, lift, lower, rotate wrist, and pivot sideways 120°. Transparent arm shows the state-of-the-ar
This circuit will play a tune when light strikes a light dependent resistor, such as when a music box lid is opened.
Three relay-based electronic switching circuits that switch according to light levels.
A bright, variable flash rate strobe light. This is a 9 Volt battery powered xenon tube flasher. A small circut is easily transported for camping etc. Flash rate may be varied between 1 and 4 flashes per second.
Old time style with the following options: 20,000 ohm/Volts, 19 Ranges, 3.5 Meter, dB Scales, Audible Continuity, Battery Tester, 10A DC Current.
The circuit flashes five LED's in sequence repeatedly until you turn it off. Flash rate is user adjustable. The circuit uses an IC chip on Board which you will then mount on the included mother board; battery holder is included. Powered by a 3 volt supply
An educational learning module. Build and experiment with the astable, monostable and RS flip-flop multivibrators on one PC board with six LED's. Understand exactly how each one works. Operates on a 9 Volt battery.
A sensitive photo Darlington transistor is used with a CMOS nand gate. The circuit detects light and triggers a siren. You could add your own triac or relay and switch practically anything. The kit uses the MEL12 Darlington super alpha phototransistor, ty
Adjust the sensitivity of this circuit to control a Relay that can turn on whatever is connected to the contacts of the relay. Very practical circuit for a variety of projects. Turn on a light when your dog barks, or set of a siren when an intruder makes
Introduces the Optocoupler-triac MOC3010. Complete electrical isolation between input audio signal (low voltage circuit) and output light modulation. Operates from 100 VAC line. Audio input via 3.5mm jack.
A stronger, Mecha-Medusa is a walking robot that operates with the aid of a sound sensor. Clap hands or snap fingers to command this robot to start walking on four legs. Stops automatically after a preset time. Ideal for the hobbyist or budding scientist.
0 Comments - in Fun and Games
Circuits that operate just like the real gameshows, where a light shows up for the first contestant to hit their answer button.
1 Comment - in Sound Activated
This super cool circuit behaves as a clapper-switch. You clap and the circuit turns on. Clap and it turns off. Great as a light clap switch.