Audio: Video Transmitter

An excellent Stereo FM Transmitter which operates through the USB port of essentially any computer. FCC Compliant!

The Veronica 1 Watt PLL FM Transmitter is a pretty decent broadcast PLL exciter or transmitter that can be used alone or with an RF power amplifier for high power radio broadcast.

The most powerful circuit we've seen that operates on such low voltage (just two AA cells). A range of 100 meters can be expected and, given a good antenna and FM receiver, 500 meters can be expected. An external power supply can be used up to 9 volts. Tr

The TX50 from Broadcast Warehouse is an extremely high quality stereo FM transmitter that complies with FCC Standards, meaning that it can be used for commerical broadcasting. Output power is 50 Watts.

The TX25 from Broadcast Warehouse is an extremely high quality stereo FM transmitter that complies with FCC Standards, meaning that it can be used for commerical broadcasting. Output power is 25 Watts.

The TX150 from Broadcast Warehouse is an extremely high quality stereo FM transmitter that complies with FCC Standards, meaning that it can be used for commerical broadcasting. Output power is 150 Watts.

The TX300 from Broadcast Warehouse is an extremely high quality stereo FM transmitter that complies with FCC Standards, meaning that it can be used for commerical broadcasting. Output power is 300 Watts.

Now, these aren't related to electronics, but we get a lot of hits from search engines related to Lamborghini videos, so here are some videos to satisfy!

AM Transmitter circuit diagram, designed for transmission of AM (Amplitude Modulation) DSB (Double Side Band) radio signals. Ideal for HAM's

The TX5 from Broadcast Warehouse is an extremely high quality stereo FM transmitter that complies with FCC Standards, meaning that it can be used for commerical broadcasting. Output power is 5 Watts.

1 Watt Audio Amplifier. 8 Ohms impedance. 20 Hz to 20 kHz. Small, few components.

Dick Cappel's page illustrates an extremely basic small FM transmitter that rebroadcasts sounds using a 1.5 Volt battery. very simple circuit.

Simple 4-transistor transmitter electronic circuit that produces a Frequency Modulated (FM) signal at approximately 100MHz.

Schematic for an electronic audio level VU meter that uses LED's to display the volume/audio levels.

Harry Lythall shares his v7b FM transmitter circuit design. The transmitter outputs 150-300 milliWatts of RF power in the 88-108 MHz band.

This simple stereo audio amplifier will amplify audio for your low-medium impedance headphones and give you left/right balance control

The TX1 from Broadcast Warehouse is an extremely high quality stereo FM transmitter that complies with FCC Standards, meaning that it can be used for commerical broadcasting. Output power is 1 Watt.

This is the Brodcast Warehouse All-in-One PCB 1 Watt FM Transmitter. This item has a built in limiter / compressor & stereo encoder!

This professional FM Transmitter offers 250 Watts output power in the 88 - 108 MHz band. The transmitter itself is digitally controlled and is extremely user friendly.

This professional FM Transmitter offers 25 Watts output power in the 88 - 108 MHz band. The transmitter itself is digitally controlled and is extremely user friendly.

A powerful little circuit with surprisingly good audio quality. Can transmit up to 1/2 mile in open spaces. This is one of the most powerful FM transmitters that you can legally purchase. An electret microphone is used to add sensitivity. The circuit come