Miscellaneous: 12 Volt Relays & Relay-Based Schema's (Schematics)

Low cost 12 channel Infrared Remote Control with relay board

There are many applications where you need quick availability of a relay for connection to a particular piece of apparatus. We found in developing our kits that we always needed to have a relay mounted on a PCB within arms reach.

Use an old PC as a "dedicated controller" to turn on or off devices lab or radio shack. The circuit includes eight relays controlled with (included) software for either DOS or Windows 3.1. The kit is a boon to the Science Fair project, laborator

Use an old PC as a dedicated controller to turn on or off devices lab or radio shack. The circuit includes eight relays controlled with (included) software for either DOS or Windows 3.1. The kit is a boon to the Science Fair project, laboratory experiment

You can program this stand alone controller via PC Serial Port. Simply connect a serial cable from your computer to the connector on relay board.

Timer circuits are handy for many experimenters projects, not to mention the photo lab. This kit has three separate circuits that can be used individually or together. Each circuit has a separate 5 Amp relay. Circuits operate on 9 Volt DC.

You can program this stand alone controller via PC Serial Port. Simply connect a serial cable from your computer to the connector on relay board.

This mini-VOX - voice operated relay - is based on a circuit published in Silicon Chip, 9/1994, p31.

The primary function of this Relay Board is to turn devices on or off. It's simple!

The most popular use for this kit is to make you own night-light. It can also be used to switch just about any appliance on or off in light or darkness. Light sensitivity is adjustable over quite a range. The relay can handle up to 10 Amps at 110VAC. Oper

Both a touch and a contact switch are built on one PC board so that the builder can see how each works. A battery can power the contact switch but you'll need an AC power supply for the touch switch to work well. The circuit switches a relay with a 3 Amp

A very basic power supply that can be adjusted over a range of about 1.5 to 35 volts DC. If you add a heat sink (included), you can run it as hot as 2 Amps output; otherwise about 60 mA @ 12 volts. This is a text book circuit using an LM317, which is a 3

4 Channel RF Remote Control Relay Board with Auto Roll

A very basic power supply that can be adjusted over a range of about 1.5 to 35 volts DC. If you add a heat sink (included), you can run it as hot as 2 Amps output; otherwise about 60 mA @ 12 volts. This is a text book circuit using an LM317, which is a 3

An extremely simple and cheap DC power supply with variable voltage (1.2-25 Volts) control. The circuit uses an LM317 integrated voltage regulator Ic.

The most powerful circuit we've seen that operates on such low voltage (just two AA cells). A range of 100 meters can be expected and, given a good antenna and FM receiver, 500 meters can be expected. An external power supply can be used up to 9 volts. Tr

Easy to build sound effect generator kits, inludes several different sounds and tunes.

A very simple variable power supply with a DC output voltage adjustable from 1-3- Volts, with a maximum DC current of 5 Amps. Uses LM338 DC voltage regulator IC.

A low power consumption circuit that uses few components in order to power a 6 inch fluorescent tube (AC) from 12 Volts DC.

The most powerful circuit we've seen that operates on such low voltage (just two AA cells). A range of 100 meters can be expected and, given a good antenna and FM receiver, 500 meters can be expected. An external power supply can be used up to 9 volts. Tr

4 Channel RF Remote Control Relay Board with Auto Roll